- 4X thicker than traditional blacktop driveway sealers
- High Performance Low VOC Micro Surface
- Easy, one step application using Lift® FLEX® Applicator
- Keeps cracks & flaws covered with ONE uniform surface
- Resists damage from UV rays, de-icing agents and fuel
- 15 Year Warranty
[layerslider_vc id=”4″]
[layerslider_vc id=”5″]
Photos
Video
Resources
LIFT® Driveway Overlay Application Instructions
Keep Cracks & Flaws Covered with ONE Uniform Surface…LIFT®
TEMPERATURE/WEATHER
Apply when temp is Above 50° F
& no rain in forecast for 24 hrs
COVERAGE
One 4.75gal. pail covers
approximately 200 sq. ft.
DRY TIME
4 hours for foot traffic
24 hours for vehicle traffic
TOOL
Apply using Lift™
FLEX™ Applicator
SURFACE PREPARATION
Fix major repairs including cracks
wider than ½” & allow to cure.
Rinse & clean driveway. Broom
off prior to application
APPLICATION TIPS
Work with gravity applying back and
forth across width of driveway
CLEAN UP
Use soap and water to
clean hands and tools
*Application Disclaimer:
- The thickness or ‘build’ of the Lift product will depend upon the porosity of the asphalt.
- Two coats may be applied but we recommend waiting 48 hours prior to applying second coat.
- Yes, Lift can be applied to previously sealed asphalt. (Lift will NOT work on concrete).
- Any coating is only as good as the surface it goes on. Make your repairs first and apply to a clean driveway.
- DO NOT apply if rain is forecast for 48 hours – and stay off driveway with cars for 48 hours after applying. It needs to cure properly. (This is an update to packaging.)
Contact us for questions about this product and to find out when it’s coming to a location near you!
